Bobcat S185 – fuse box diagram
Year of production:
Fuse box
| Number | Ampers | Protected circuit |
| 1 | 25 | Unswitched Horn |
| 2 | 5 | ACS/AWS/SJC Switched |
| 3 | 25 | Alternator & Accessories Back-up Alarm |
| 4 | 25 | Attachments |
| 5 | 25 | Heater & Air Conditioning |
| 6 | 15 | Front & Marker Lights |
| 7 | 15 | Rear Lights |
| 8 | 25 | Bobcat Controller |
| 17 | 30 | Traction |
| 18 | 30 | Fuel Shutoff |
| 19 | 15 | Power Plug |
| 20 | 25 | ACS/AWS/SJC Unswitched |
| Relay | ||
| 9 | Heater & Air Conditioning | |
| 10 | Switch Power | |
| 11 | Front & Marker Lights | |
| 12 | Fuel Shutoff | |
| 13 | Rear Lights | |
| 14 | Traction | |
| 15 | Glow Plugs | |
| 16 | Starter | |
The loader has a 12 volt, negative ground alternator charging system. The electrical system is protected by fuses located in the cab on the steering control panel, and a 100 ampere master fuse in the engine compartment on the left side of the engine, under the air cleaner. The fuses will protect the electrical system when there is an electrical overload. The reason for the overload must be found before starting the engine again.
The electrical system is protec ted from overload by fuses and relays under the fuse panel cover (Item 1). A decal is inside the cover to show location and amperage ratings.
Remove the cover to check or replace the fuses.
WARNING: Terminal and harness assignments for individual connectors will vary depending on vehicle equipment level, model, and market.